PDA

View Full Version : Just shows a DOT in the middle ??



Wizzard005
06-21-2003, 07:00 PM
Hey all,

The computer that runs MySEQ server is a Windows XP Pro box. It finds the Pid number and then thats it. On my Windows 2000 Server box the Client only shows a red dot in the middle of the screen. Is there a way to correct this? If I run eq windows and the server on the windows 2000 server box seq runs find with no problems. I just want to get it to run on its own box.

Any info will help.

unknown_errors
06-22-2003, 03:56 AM
all i'm getting is a red dot.. going to install the net framework on both systems see if that helps..

z26o
06-22-2003, 11:09 AM
I recently installed MySEQ for a friend and he got the "Red Dot"also. The solution for us was to update the offesets to the 6/11 ones. They were not included in the distribution we downloaded. So I would check there first.

Wizzard005
06-22-2003, 09:04 PM
humm I am running the lastest and greatest. SEQ runs fine when running the client and server todether on the same box, but when you try to run just the client I get that error... its real odd..

-Wizz

gonecrazy
06-24-2003, 08:36 AM
It sounds like the ip address on the client computer is set incorrectly. Make sure you set it to the ip of the computer where the server is running.