2/10/10 Offsets

The GroundItem Offsets have been corrected, so these should all be correct now.

Quote:

---

[File Info]
Patchdate=2/10/2010

[Port]
port=5555

[Memory Offsets]
ZoneAddr=0xb0d5f0
ZoneInfoAddr=0xa94840
SpawnHeaderAddr=0xa903f8
CharInfo=0xa903f8
ItemsAddr=0xa903c8
TargetAddr=0xa90410
WorldAddr= 0xa903c4

[WorldInfo Offsets]
WorldHourOffset=4
WorldMinuteOffset=5
WorldDayOffset=6
WorldMonthOffset=7
WorldYearOffset=8

[SpawnInfo Offsets]
NextOffset=0x4
PrevOffset=0x8
LastnameOffset=0x38
XOffset=0x64
YOffset=0x68
ZOffset=0x6c
SpeedOffset=0x7c
HeadingOffset=0x80
NameOffset=0xa4
TypeOffset=0x125
SpawnIDOffset=0x148
HideOffset=0x3b4
LevelOffset=0x325
RaceOffset=0xe78
ClassOffset=0xe7c
PrimaryOffset=0xf48
OffhandOffset=0xf54

[GroundItem Offsets]
PrevOffset=0x00
NextOffset=0x04
IdOffset=0x08
DropIdOffset=0x0c
XOffset=0x50
YOffset=0x54
ZOffset=0x58
NameOffset=0x1c

---

No luck with ground spawns since patch. I haven't been able to locate a valid offset for them.

I hadn't noticed it before (lobby only has the 2 augment pools to show up), but looks like you are correct. If someone posts those changes later I will edit my original post to show the correct info.

Edit: It looks like when the client connects, the server does show the correct # of ground spawns (numItems), the client just isn't showing them on the map.

I had to update this struct for MQ2. You can pull the new offsets from there.

Code:

---

typedef struct _GROUNDITEM {
/*0x00*/ struct _GROUNDITEM *pPrev;
/*0x04*/ struct _GROUNDITEM *pNext;
/*0x08*/ DWORD  ID;
/*0x0c*/ DWORD  DropID;
/*0x10*/ DWORD  Unknown0x10;
/*0x14*/ DWORD  Unknown0x14;
/*0x18*/ PEQSWITCH pSwitch; // (class EQSwitch *)
/*0x1c*/ CHAR  Name[0x18];
/*0x34*/ BYTE  Unknown0x34[0xc];
/*0x40*/ FLOAT  Heading;
/*0x44*/ BYTE  Unknown0x44[0xc];
/*0x50*/ FLOAT  Y;
/*0x54*/ FLOAT  X;
/*0x58*/ FLOAT  Z;
/*0x5c*/ BYTE  Unknown0x5c[0xc];
/*0x68*/
} GROUNDITEM, *PGROUNDITEM;

---

Code:

---

[File Info]
Patchdate=2/10/2010

[Port]
port=5555

[Memory Offsets]
ZoneAddr=0xb0d5f0
ZoneInfoAddr=0xa94840
SpawnHeaderAddr=0xa903f8
CharInfo=0xa903f8
ItemsAddr=0xa903c8
TargetAddr=0xa90410
WorldAddr= 0xa903c4

[WorldInfo Offsets]
WorldHourOffset=4
WorldMinuteOffset=5
WorldDayOffset=6
WorldMonthOffset=7
WorldYearOffset=8

[SpawnInfo Offsets]
NextOffset=0x4
PrevOffset=0x8
LastnameOffset=0x38
XOffset=0x64
YOffset=0x68
ZOffset=0x6c
SpeedOffset=0x7c
HeadingOffset=0x80
NameOffset=0xa4
TypeOffset=0x125
SpawnIDOffset=0x148
HideOffset=0x3b4
LevelOffset=0x325
RaceOffset=0xe78
ClassOffset=0xe7c
PrimaryOffset=0xf48
OffhandOffset=0xf54

[GroundItem Offsets]
PrevOffset=0x00
NextOffset=0x04
IdOffset=0x08
DropIdOffset=0x0c
XOffset=0x50
YOffset=0x54
ZOffset=0x58
NameOffset=0x1c

---

Thanks. It appears I am no longer able to edit my posts, so can't fix the original.

The forums were set to only allow edits up to two days after the post was created. I made it indefinite, so now you should be able to edit your first post.

Thanks for the update.

So are the offsets scotties posted correct? Does anything else need to be done to get myseq up and running from fresh install? Been a while since i have used this program but i know how to update my offsets.

Both offset posts should be identical now, but they have been working fine so far for me. On a fresh install you will need to also add maps. Can either copy them in directly from EQ or use the mapconvert script in the MYSEQ maps folder. Either should work, but the converted maps should allow to program to operate more efficiently.

Converting maps right now. Will see if that helps. Should do the trick.

Darn. Copy pasted the offsets above into the file where they go. Then ran the map conversion in the map folder. Started it and then started EQ and got nothing. Hmmm. Back to the drawing board.

Also, whats is that code above with regard to new struct for MQ2?

Quote:

---

Originally Posted by Razgak

Also, whats is that code above with regard to new struct for MQ2?

---

It's so they could get the new struct offsets for ground items.

Quote:

---

Originally Posted by Razgak

Darn. Copy pasted the offsets above into the file where they go. Then ran the map conversion in the map folder. Started it and then started EQ and got nothing. Hmmm. Back to the drawing board.

---

Make sure the offsets you paste into myseqserver.ini actually replace the old offsets, and you don't have 2 sets of offsets in there. Did you start both MYSEQ programs? The server must be run on the computer running EQ. The client can run on the same or another computer, but if running it on another computer, you will need to go into the Options and give it the local IP address of the computer the server/EQ are running on.

lol.... i COMPLETELY forgot about it needing two programs. Jesus i have been away for a while.

Works like a charm. Thank you for the help and patience.