Client 3.0 Problems

First, I had to scrap my old install to get MySeq to even load MySEQ 3.0.

I then DLed the latest pre-3.0 DL and then added the 3.0 client, updated offsets, DLed and installed maps from Redguides and put them in the maps folder and then MySeq did come up, but isn't showing any maps nor is it saving all settings on exit.

It is making a new config file at C:\Users\xxx\AppData\Local\MySEQ_Project\MySEQ.exe _Url_fgnlmrudficwh3yu5lulnivwkth4mfiy\3.0.0.0\User .Config but isn't saving settings such as F6, Font changes, Lists that are open, probably others.

this is my current config file:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="myseq.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowExeDefinition="MachineToLocalUser" requirePermission="false" />
</sectionGroup>
</configSections>
<userSettings>
<myseq.Properties.Settings>
<setting name="GridColor" serializeAs="String">
<value>DarkGreen</value>
</setting>
<setting name="BackColor" serializeAs="String">
<value>Black</value>
</setting>
<setting name="RangeCircleColor" serializeAs="String">
<value>DarkGray</value>
</setting>
<setting name="DrawOptions" serializeAs="String">
<value />
</setting>
<setting name="FollowOption" serializeAs="String">
<value>Player</value>
</setting>
<setting name="GridLabelColor" serializeAs="String">
<value>Yellow</value>
</setting>
<setting name="ListBackColor" serializeAs="String">
<value>White</value>
</setting>
<setting name="OptionsWindowsSize" serializeAs="String">
<value>296, 480</value>
</setting>
<setting name="OptionsWindowsLocation" serializeAs="String">
<value>20, 20</value>
</setting>
<setting name="AutoSelectSpawnList" serializeAs="String">
<value>True</value>
</setting>
<setting name="MaxLogLevel" serializeAs="String">
<value>Default</value>
</setting>
<setting name="PCBorderColor" serializeAs="String">
<value>Fuchsia</value>
</setting>
<setting name="playAlerts" serializeAs="String">
<value>True</value>
</setting>
<setting name="MapDir" serializeAs="String">
<value>H:\MySEQ\maps</value>
</setting>
<setting name="CollectMobTrails" serializeAs="String">
<value>False</value>
</setting>
<setting name="SpawnDrawSize" serializeAs="String">
<value>5</value>
</setting>
<setting name="ShowMobList" serializeAs="String">
<value>True</value>
</setting>
<setting name="TimerDir" serializeAs="String">
<value>H:\MySEQ\timers</value>
</setting>
<setting name="CfgDir" serializeAs="String">
<value>H:\MySEQ\cfg</value>
</setting>
<setting name="TargetInfoFont" serializeAs="String">
<value>Microsoft Sans Serif, 8.25pt</value>
</setting>
<setting name="WindowState" serializeAs="String">
<value>Maximized</value>
</setting>
<setting name="MapLabel" serializeAs="String">
<value>Microsoft Sans Serif, 8.25pt</value>
</setting>
<setting name="ListFont" serializeAs="String">
<value>Microsoft Sans Serif, 8.25pt</value>
</setting>
<setting name="WindowsLocation" serializeAs="String">
<value>-1714, 226</value>
</setting>
<setting name="LogDir" serializeAs="String">
<value>H:\MySEQ\logs</value>
</setting>
<setting name="FilterDir" serializeAs="String">
<value>H:\MySEQ\filters</value>
</setting>
<setting name="CurrentIPAddress" serializeAs="String">
<value>1</value>
</setting>
<setting name="ShowGroundItemList" serializeAs="String">
<value>False</value>
</setting>
<setting name="DepthFilter" serializeAs="String">
<value>True</value>
</setting>
<setting name="ShowMobListTimer" serializeAs="String">
<value>False</value>
</setting>
<setting name="WindowsSize" serializeAs="String">
<value>1325, 526</value>
</setting>
<setting name="MatchFullTextA" serializeAs="String">
<value>False</value>
</setting>
<setting name="AlertInsideRangeCircle" serializeAs="String">
<value>False</value>
</setting>
</myseq.Properties.Settings>
</userSettings>
</configuration>

It's not using filters either.

and I'm getting unhandled exceptions most of the time on launching MySEQ.

I'm working through the config changes. I think I've got a bunch more sorted out now, but I'll add the specific ones you listed to double check.

I'm not familiar with the maps at redguides, but if they are showeq maps, then MySEQ doesn't use those. You need the maps you use in game. From Brewall or Goods for example.

Hopefully later tonight or early in the morning I'll release a new client that has most if not all of the config stuff fixed, as well as find on map, and con colors.

Quote:

---

Originally Posted by eqDialup

I'm working through the config changes. I think I've got a bunch more sorted out now, but I'll add the specific ones you listed to double check.

I'm not familiar with the maps at redguides, but if they are showeq maps, then MySEQ doesn't use those. You need the maps you use in game. From Brewall or Goods for example.

Hopefully later tonight or early in the morning I'll release a new client that has most if not all of the config stuff fixed, as well as find on map, and con colors.

---

So this doesn't use the converted maps like previous MySEQ? I'll try one of those suggested map files. It would be nice if it used the same file as EQ does.

You might want to post a complete working setup you're using maybe or at least as much as you're willing to post so people can DL a ready to go setup.

Thanks for your work though!

Maps working now! Yeah! Thanks.

cannot seem to change the port # either

@ eqDialup, truly doing gods work bringing a port x64bit :clap: :clap: I was going to comment on the thread but it looks like others have already run into similar experience with the current build. So i'll patiently wait for your next release of the build. On a small does it also address filtering by names? Currently that doesn't work properly.

Thanks again for putting out a x64bit version of the application. :o