hello, i've spent an hour or more researching to no avail. i was wondering if any recognizes the piece of hardware i'm using. i've lost the manual... i'm using a SoHo 8port 10mbps ethernet hub. it has an uplink, eight ports, and zero buttons. this is all the information i have on this. below is a link to a photo of the equipment (sorry for poor quality ). here is my question to anyone who recognizes this hub: is it a switch labeled a hub?
showeq loads and detects no everquest clients.
my setup is this.
adsl modem --> soho hub --> seq / eq
the diagram might be incorrect, i'm not good with that shit, but the adsl modem is plugged in uplink on the hub, and the eth0 device in linux is on promisc mode
i believe i'm either in error on my network configuration, or my hub is not really a hub.
i guess i'm asking is this hub a repeater or could it be a switch-based hub?
sorry if my terminology is not correct
http://ebay3.ipixmedia.com/abc/M28/_...0b4262/i-1.JPG
image of soho hub
p.s. to anyone reading this i appreciate and thanks for your time.
p.p.s. if my "hub" is the issue could anyone recommend an inexpensive hub that works with showeq.