Hi all
first of thank you all for helping me so nicely and reading my posts.
after an installation with as far as I can tell no errors I start ShowEQ, my network setup is the following: modem --- linuxbox --- SWITCH --- my EQ comp among others..
the modem goes into the linux box on interface eth0, then eth1 is connected to the LAN. the IP of my EQ comp is 192.168.1.13 and the ip of the linux box is 192.168.1.1.
Now I have the interface to listen on set to eth1, and the IP adress of the EQ client 192.1681.1.13.
and the errors I get look like this:
my firewall is shorewall, which bases on IPtables, is maybe that blocking something of SEQ? wouldnt make sense tzhough imo since its only "listening" right?<here are alot more lines like the following 3 with only slight differeces, thought I dont post em all>
WARNING: RemDropCode (00fe) (dataLen:310 != sizeof(remDropStruct):10)!
WARNING: RemDropCode (00fe) (dataLen:310 != sizeof(remDropStruct):10)!
WARNING: RemDropCode (00fe) (dataLen:310 != sizeof(remDropStruct):10)!
Your player's id is 1788
error: size > left (size=252, left=7, opcode=0x025c)
error: size > left (size=253, left=92, opcode=0x0144)
error: size > left (size=254, left=101, opcode=0x0144)
<the 3 lines above keep coming up always with the different numbers with like 5 seconds delay>
also I tried to add a policy to the firewall which states something like this: all:all ACCEPT and it still didnt work..
what happens in the SEQ window is the following, when I start EQ I get the circle with the 2red and a yellow line and it turns in the right direction.. I get all the spawns but they are "unknowen" except myself which displays as human warrior which I am not. (thats the default though I know that)