11/5 Offsets

[MQSEQ2]

[Memory Offsets]
GroupCountAddr=7454208
GroupAddr=7454536
SpawnHeaderAddr=7460984
ItemsAddr=7460988
CharAddr=7461040
CharInfo=7461048
TargetAddr=7461052
GuildsAddr=7479052
ZoneAddr=7838464

The ZoneAddr=7838464 has been reported to work in LDoN and normal zones.

If that offset doesn't work you can use:
ZoneAddr=7055468

This address will not work with LDoN zones from what I've been told.

[Yrvaken]

dont work whit 1.9b. Map dont load. and if i open map myself it stays there for some sec and a error mess apear and map unloads

[MQSEQ2]

Ok lets try a different Zone address:

From MacroQuest:

Zoning=0076a808
Zones=0071d874
ZoneInfo=008ba82c

Lets try:

ZoneAddr=7776264

Or

ZoneAddr=9152556

[Midnight]

Ok the '9' one worked to load spawns.. but map doesnt load and the program insta crashes after spawns pop up. So others will need to be converted? This is on 1.10 + 1.54 (or whatever newest ver)

[MQSEQ2]

Edit the myseqserverc.ini file with Notepad then scroll down to the ZoneAddr line make the change then save the file.


That should do it for you. Once we get the correct settings I will post a new Ini file so everyone can download it.

[CybMax]

As i said in another thread, you cannot directly convert the ZoneAddr from Hex to Decimal and use with Myseq

There is some difference in the address, and i am pretty sure i once found some "formula" to convert this.. ie. MQ-x=Myseq sumtin or other..

Will take a look at it..

[Yrvaken]

ok whit ZoneAddr=7776264 the map did not whant to load on start up but if i loaded it up myself it did seam to work great.. and


ZoneAddr=9152556

did not work for me att all
Tested on server 1.10

[MSMage]

This offset:

ZoneAddr=9152556

Works, though i had to manually load the map
To add the offset, open up "myseqserverc.ini". Find the line under the header Memory Offsets titled "ZoneAddr" and change the number so that it matches the new working offset.

[Yrvaken]

ehhmm now ZoneAddr=9152556 works

[MQSEQ2]

Good job all on the testing of the offsets.

Once I get home I will be able to login into EQ and test the offsets if we don't get them resolved ahead of time. I will step thru the code to see what is beeing returnedfor the server. There could have been some EQ structure changes that may require some more work.

[CybMax]

Does not load map here at me tho.. So even tho it dont produce any error message, does not mean it work..

[MQSEQ2]

I will look into it ASAP. Does it show the Short Zone Name in the lower Right hand corner? sounds like the Short name is not coming accross right and that is what is used to open the proper map file.

I will also try to add more logging information so we can look into what's being done for those who don't have compilers.

[CybMax]

Nope.. it does not show the short name at all, so my guess is that its the wrong address.

I remember i did once take a look at old MQ adresses and old myseq offsets (working ones).. had 2-3 of them, and i found some "formula" i used.. I dont remember what i did anymore, and i have been to lazy of late to refresh that. (specially since the patches is not that often anymore)

So.. If anyone can grab some old verified myseq offsets from previous patches, and compare them with the offsets from MQ of the same date, i am sure you can figure it out..

[JustAnotherUser]

ZoneAdr=7055468 works for a friend. My install is §%/§/up though

[CybMax]

Verified!