Little Help please

[Bounx08]

I`m new here, but i DL`ed everything like it says, i have all the maps, my IP address is correct, but when i fire everything up, nothing comes up in the client box. I tried unloading and re-downloading everything but the same thing happens. Where the map should be, it just says welcome to my SEQ and nothing where the mob names should be.
Here is what the MYSEQ server thingy has on it:
NetworkServer: New connection from: <my IP>
MemReader: Found process ID 0x924
NetworkServer: Zonename is
NetworkServer: pSelf is 0x0
NetworkServer: pTarget is 0x65706f48
NetworkServer: pSpawnlist is 0x0
NetworkServer: Warning: maxLoop reached finding pSpawnlist
NetworkServer: pItems is 0x0
Memreader: Found process ID 0x924
Memreader: Found process ID 0x924
NetworkServer: numSpawns<0> numItems<0>
NetworkServer: Closing client socket
NetworkServer: Closing listener socket
IniReader: Reading INI file ./myseqserver.ini with patch date of 12/05/2007
Spawn: Spawn Offsets read in.
Item: GroundItem Offsets read in.
NetworkServer: Port value and memory offsets read in.
NetworkServer: Listening on port 5555

Any help here would really be appreciated.. thanks

[BlueAdept]

Moved to the correct forum.

BTW Are you using the correct offsets? The program will not work without using offsets.

[Hidron]

IniReader: Reading INI file ./myseqserver.ini with patch date of 12/05/2007

You seem to be using some old offsets. These are stored in the myseqserver.ini file. Change the top section of the file with the information here http://www.showeq.net/forums/showthread.php?t=6103

[Bounx08]

ok DL`ed the off sets you posted, will see that works, thanks alot for the responce

[Bounx08]

nope still nothing... frustration building

[Hidron]

It should have at least changed some of what you were seeing.

Try running:

myseqserver debug

Then at the menu press 'd' and Enter.

Cut/Paste what you see (except for the menu).