Showeq 6 and Raspberry Pi 4

[BlueAdept]

I was successfully able to run SEQ6 on a pi 4 with Raspbian. My pi was a 4gb but it should work on other versions.

EDIT: SEQ runs on Buster but not newer images. Please install buster and read the edits to get it to work.

as root or sudo these commands

apt-get update
apt-get upgrade
apt-get install xdm x11-apps libx11-dev libvte9 qt4-default subversion libtool make automake libpcap-dev libxext-dev

It will ask which window manager you want. Keep lightdm.
After it is done, reboot.
--------------------------------------------------------------------------------------------------------
If you want to use the pi as an access point for your laptop, you will need to install Rasp-ap.

curl -sL https://install.raspap.com | bash

https://raspap.com

reboot and set it up.
-------------------------------------------------------------------------------------------------------

./configure && make && make install

That is it! It is a lot simpler than the pi 3.

Edit: added libx11-dev that was not installed. Added it to the list. My default install had libxext-dev already installed, but if configure fails, try installing it.

Edit2: re-added libxext-dev to the list. I dont know why mine said it was installed already and someone else said it wasnt. It cant hurt, at worst it will say it was already installed.

New: add libice-dev to the list.

[cn187]

I'm pretty sure it's not actually failing on the docs (mine are never installed), but rather a silent library check right after the doc check. There are a couple of extra libraries that the configure script is expecting that aren't actually checked for (or otherwise mentioned). I think if you make sure that libxext-dev and libx11-dev are installed, it should configure without disabling qt validation. I've been meaning to tweak the configure scripts to either explicitly check for the presence of those libs, or remove the dependency if it's no longer needed. But unfortunately I haven't had time lately.

[BlueAdept]

Thanks, Ill try that.

That worked. It was libx11-dev that it was looking for.

[cn187]

I've added checks to configure for X11 and Xext, so this will hopefully not be an issue any more.

[desummon]

Heya,

First of all great kudos and thanks to the volunteers who keep SEQ running. I've been using it for 19 years, never would have thought the game would have lasted this long, much less SEQ

I've been running SEQ on a Pi3 for the last 4 years. Big surprise, Qt 4 isn't on my raspian install but that image is also 4+ years old.

So what image/version of Raspian has Qt4 included with? Or, is there a procedure to apt-get the appropriate packages and get Qt4 going on the old platform? I can install any OS to the Pi you indicate and carry out any commands. Just need to be told what to do

Many Thanks Guys

[Shinigami]

Good stuff. Is there a a way to run the raspberry pi headless, and access it from my windows PC running EQ? Would something like XDMCP be worth looking into?

[cn187]

So what image/version of Raspian has Qt4 included with? Or, is there a procedure to apt-get the appropriate packages and get Qt4 going on the old platform? I can install any OS to the Pi you indicate and carry out any commands. Just need to be told what to do

I haven't messed with the pi much, other than a test install on an older one. Hopefully BlueAdept or one of the other pi users can point you in the right direction.

Good stuff. Is there a a way to run the raspberry pi headless, and access it from my windows PC running EQ? Would something like XDMCP be worth looking into?

I know I've seen posts here about using X forwarding over SSH, and also using Xming. I don't recall anyone discussing XDMCP, but I could have missed it. At any rate, I think it's certainly possible to do what you're asking.

[Shinigami]

hmm. I believe I got this installed, but I'm having issues trying to launch it in terminal. When I type showeq in the command line, it says it's an invalid command. I've only used showeq with CentOS thus far, so chances are I am missing something really simple. Do I need to manually add it to PATH or something? Is there a way to directly launch the showeq executable?

[cn187]

hmm. I believe I got this installed, but I'm having issues trying to launch it in terminal. When I type showeq in the command line, it says it's an invalid command. I've only used showeq with CentOS thus far, so chances are I am missing something really simple. Do I need to manually add it to PATH or something? Is there a way to directly launch the showeq executable?

Running `make install` will default to installing ShowEQ under the /usr/local/ hierarchy, with the executable in /usr/local/bin. This should already be in your path.

[Shinigami]

Running `make install` will default to installing ShowEQ under the /usr/local/ hierarchy, with the executable in /usr/local/bin. This should already be in your path.

Okay. is the executable just called "showeq" ? or is there an extension

[cn187]

Okay. is the executable just called "showeq" ? or is there an extension

It's just `showeq`, no extension.

[faster100%]

Which OS are you using? I just ordered PI 4, 8gb should be here tomorrow.
Any step by step guides anywhere? I search and only saw PI 3.

FYI, Thanks for your time.

[kkmonte]

Edit: added libx11-dev that was not installed. Added it to the list. My default install had libxext-dev already installed, but if configure fails, try installing it.

Brand new Raspberry pi 4 that I got today from Amazon, after updating and upgrading everything, I needed to install libxext-dev as well as the other packages you noted above. Worked great.

[edward]

With a 64-bit install of Raspberry Pi OS from https://downloads.raspberrypi.org/raspios_arm64/ the showeq6 configure script required some help finding the architecture and qt libs.

I've had success running configure with the following:

./configure --build=aarch64-unknown-linux-gnu --with-qt-libraries=/usr/lib/aarch64-linux-gnu

[BlueAdept]

That is overkill. I used a pi4 with 4gb (just what I had on hand. It should work with less since the old worked on Pi3 with 1gb) and it works fine.