Performance issues with SEQ 4.3.18

[quackrabbit]

My system (RH 7.3, 866MHz PIII, 512MB RAM) used to be ready before my PC finished zoning. With 4.3.18 SEQ stays "busy zoning" for up to 15-20 seconds after I've already loaded into the zone.

Nothing (that I know of) has changed in the configuration with either my systems. It's primary (if not only) function is SEQ.

Anyone else notice a change in performance in regards to zoning?

To verify my suspiscions, I am going to download 4.3.17.1 (and apply the patches) and test its performance vs 4.3.18.

[Cryonic]

Others have suggested disabling the item db since that seems to have come back up as a performance hit again.

[showeqgratefull]

Hello,

I had this same issue back in 4.3.17.1 and i read a different
post that suggested moving the filters i downloaded from blueadepts
web site. After removing those everything worked fine.

see this link:
http://seq.sourceforge.net/forums/showthread.php?s=&threadid=4176


HTH
Showeqgratefull

[quackrabbit]

I'm not using BA's filter files.

[quackrabbit]

Well, the performance between a patched version of 4.3.17.1 and 4.3.18 were almost identical...

So I guess it's not SEQ.

[domesticbeer]

I had this issue, but start ShowEQ with the --itemdb-disable command fixed it.

[quackrabbit]

Originally posted by domesticbeer
I had this issue, but start ShowEQ with the --itemdb-disable command fixed it. I never did try that. I'll try tonight!

[quackrabbit]

Originally posted by domesticbeer
I had this issue, but start ShowEQ with the --itemdb-disable command fixed it. I tried the --itemdb-disable and it helped my zoning time a bunch, so that is definitely where the performance issue is.

Thanks for the help!