Seaxouri
02-21-2006, 07:58 PM
[File Info]
PatchDate=2/21/2006
[Port]
port=5555
[Memory Offsets]
SpawnHeaderAddr=0x966180
CharInfo=0x966180
TargetAddr=0x966198
ZoneAddr=0x984128
ItemsAddr=0x0
[SpawnInfo Offsets]
NameOffset=0x74
LastnameOffset=0x10
XOffset=0x3c
YOffset=0x40
ZOffset=0x44
SpeedOffset=0x54
HeadingOffset=0x58
PrevOffset=0x8
NextOffset=0x4
TypeOffset=0x140
LevelOffset=0x165
HideOffset=0x298
ClassOffset=0x40c
SpawnIDOffset=0x4
RaceOffset=0xE10
Here are all of the new offsets for the Prophecy of Ro patch. I tested this with the v1.19 server and client, and it appears to be working fine.
If you are using a 1.18.x server, please update to the latest (1.19.0). I have not tested this with the old server, but I imagine you will need to keep the old 'SchemaVersion=' entry from your old INI file in order to use 1.18.x properly. The 1.19 server does not use that setting anymore, which is why I don't include it here.
Cut and paste these values into myseqserver.ini , which is located in the same folder as the server.
I also have attached below a new Races.txt file for the client which has more new races for the PoR expansion. Put this file in the client's 'cfg' subfolder. There should be an existing Races.txt file already there... just clobber it.
PatchDate=2/21/2006
[Port]
port=5555
[Memory Offsets]
SpawnHeaderAddr=0x966180
CharInfo=0x966180
TargetAddr=0x966198
ZoneAddr=0x984128
ItemsAddr=0x0
[SpawnInfo Offsets]
NameOffset=0x74
LastnameOffset=0x10
XOffset=0x3c
YOffset=0x40
ZOffset=0x44
SpeedOffset=0x54
HeadingOffset=0x58
PrevOffset=0x8
NextOffset=0x4
TypeOffset=0x140
LevelOffset=0x165
HideOffset=0x298
ClassOffset=0x40c
SpawnIDOffset=0x4
RaceOffset=0xE10
Here are all of the new offsets for the Prophecy of Ro patch. I tested this with the v1.19 server and client, and it appears to be working fine.
If you are using a 1.18.x server, please update to the latest (1.19.0). I have not tested this with the old server, but I imagine you will need to keep the old 'SchemaVersion=' entry from your old INI file in order to use 1.18.x properly. The 1.19 server does not use that setting anymore, which is why I don't include it here.
Cut and paste these values into myseqserver.ini , which is located in the same folder as the server.
I also have attached below a new Races.txt file for the client which has more new races for the PoR expansion. Put this file in the client's 'cfg' subfolder. There should be an existing Races.txt file already there... just clobber it.