The range circle won't follow my character

[Amio]

The Circle with the two lines telling me which way I am point will not follow my character. It stays at location 0,0 on the map on any zone I am in.

The "Character selection" at first didn't show me a name, just refresh list, but when I clicked on it, it shows "p??;"

Is it permanently broken or can it be fixed? It happens with both v1.22 and v1.25

Below is the offsets I have now




[File Info]
PatchDate=6/10/2009

[Port]
port=5555

[Memory Offsets]
ZoneAddr=0xa54094
SpawnHeaderAddr=0xac725c
CharInfo=0xac725c
TargetAddr=0xa4fa70
ItemsAddr=0xa4fa28
WorldAddr=0xa4fa24

[SpawnInfo Offsets]
NextOffset=0x4
PrevOffset=0x8
LastnameOffset=0x38
XOffset=0x64
YOffset=0x68
ZOffset=0x6c
SpeedOffset=0x7c
HeadingOffset=0x80
NameOffset=0xa4
TypeOffset=0x125
SpawnIDOffset=0x148
HideOffset=0x3f0
LevelOffset=0x389
RaceOffset=0xe70
ClassOffset=0xe74

[GroundItem Offsets]
PrevOffset=0x00
NextOffset=0x04
IdOffset=0x08
DropIdOffset=0x0c
XOffset=0x34
YOffset=0x30
ZOffset=0x2c
NameOffset=0x38

[Hidron]

I see there was another patch on 6/12/09. The SmartEQOffsets program is still giving me the same info though as it did after the 6/10 patch. There seemed to be problems with those offsets though. Have you tried what was posted at the bottom of the other thread? (currently 2nd post from the bottom) http://www.showeq.net/forums/showthread.php?t=6220

[Amio]

I didn't try that, but the problem has been ongoing since I reinstalled a couple weeks ago. It's not a major issue but I would like to see it fixed.

I did disable a couple services in services.msc..... stuff like error reporting and indexing... is MySEQ dependent on anything in services.msc? I can check to make sure I didn't disable it.

[Amio]

It worked! Thank you for pointing that post out!