1 Attachment(s)
Re: Showeq 6 and Raspberry Pi 4
Installing to a rpi4 today and everything seems to work but at the end it does say theres a few errors ill try to post a screen shot.Attachment 826
update: Ok I used raspbian buster from 4/4/200 and with the help of this post http://www.showeq.net/forums/showthr...inux-Mint-20-1 as well as the one we are currently in I got it all installed and launched now I need to figure out how to actually use showeq. I had to use sudo for each command otherwise it wasnt giving me permission to create the folders. Thank you for the posts.
Re: Showeq 6 and Raspberry Pi 4
Long time lurker, but figured i'd give back since i've been wanting to upgrade my pi3 for awhile now and no one has really posted much about the pi5 yet.
I bought a pi5 4gb, installed the latest raspbian bookworm OS. All the installs for the pi4 in the OP work except installing qt4 as i believe it was depreciated.
That said, installing qt5 worked and showeq runs like a charm
apt-get install qtbase5-dev
Bonus stuff:
This works on pi3 and pi5 confirmed
I run showeq through my pi PC ethernet -> pi ethernet -> pi wireless to router
PC set to static ip 192.168.1.2, gateway set to 192.168.1.1
Pi ethernet static ip 192.168.1.1, gateway set to network's actual gateway (192.168.5.1 in this case)
Installed on Pi
apt install ifmetric
apt install iptables
Run on Pi start-up
sudo su
ifmetric wlan0 50
echo 1 >> /proc/sys/net/ipv4/ip_forward
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
iptables -A FORWARD -i wlan0 -o eth0 -m state --state RELATED, ESTABLISHED -j ACCEPT
iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT