Re: ShowEQ and Raspberry Pi
Here is the image that I created. It is Jessie and will work on Pi 3b+. I also updated all the packages and installed the extra packages needed for Showeq. Enjoy....
https://mega.nz/#!6egikIIA!_zbgaDj56...c8e0TQJoIzPWgM
Let me know if anyone has issues with it.
Re: ShowEQ and Raspberry Pi
If anyone has tried this, please let me know if it worked for you.
Re: ShowEQ and Raspberry Pi
Thanks for uploading the image BlueAdept. Tried downloading twice, zip extracted fine, but the img file appears to be corrupt.
Re: ShowEQ and Raspberry Pi
Hmm. Before I had posted, I had downloaded and loaded on a card to test. It had worked then. I am working all weekend but I will try downloading and burning it again on Monday. You were using a pi3 b+ correct?
Re: ShowEQ and Raspberry Pi
I have a 3 b+, but was not able to get the img file to open up to load into card.
Re: ShowEQ and Raspberry Pi
Well unfortunately I am not going to be able to work on it for a bit. My 1 1/4 year old HP lapstop just died today. 1 year warranty so there goes 1000 down the drain. It appears to be be the motherboard. Apparently it is a common problem for HP. I will never buy another HP again.
Re: ShowEQ and Raspberry Pi
EDIT: I have the image running on my RBPi 3. Now I just need to remember how to install and run ShowEQ. It's been several years! Is there a setup guide?
Re: ShowEQ and Raspberry Pi
Re: ShowEQ and Raspberry Pi
Has anyone else tried this? I want to pull the trigger on a B+ so I have the most options when I use it for other things but I really want to use it for this.
Re: ShowEQ and Raspberry Pi
I have not tried since I upgraded my 3b image to 3b+.
As Edward posted, with that site and those instructions, you should be able to compile qt3 on the newest image.
Re: ShowEQ and Raspberry Pi
Okay, I'll give it a shot. It should come by Friday. Will post here with my progress. Since it is a B+ I am getting I'll use that image you posted.
Re: ShowEQ and Raspberry Pi
Success! This little thing rocks. It was almost too easy. I used the image provided with the install instructions, used the guide on earlier pages about using the Pi as a router and going: Internet (Ethernet) Pi (WiFi) Computer. I'm casting the Pi screen via VNC to my laptop. Did it all in one long sitting as a total Pi and Linux noob. Thanks everybody for such awesome documentation and help here, ESPECIALLY that image you provided, Blue. It was nice being able to get a B+ and still run SEQ.
My only question is will running VNC make my SEQing less secure and more prone to detection? I'm on a Truebox server but I'm pretty sure that's not something they flag like VMs.
Re: ShowEQ and Raspberry Pi
Alert sounds not working.
I use a bluetooth speaker. I found that the bt speaker works as pi, but not when you sudo or change to root. Pulled what little hair I had out over this issue but I came up with a work around.
As the user Pi in the home dir (/home/pi) create a new file named playsound.sh edit it and put this in it.
Code:
#! /bin/sh
aplay $1
Then from the alert change it to this
Code:
sudo -u pi /home/pi/playsound.sh /path/to/sound/sound-to-play.wav
Re: ShowEQ and Raspberry Pi
Thanks Blue!
I was able to install your image and get ShowEQ to run but I am getting no colors.
Using config file '/home/itchynades/.showeq/showeq.xml'
Loaded preferences file: /usr/local/share/showeq/seqdef.xml!
Unable to open file: /home/itchynades/.showeq/showeq.xml!
Info: Listening for client: 192.168.1.13
Info: Initializing Packet Capture Thread:
Info: Filtering packets on device eth0, IP host 192.168.1.13
Warning: Spells: Failed to open: '/usr/local/share/showeq/spells_us.txt'
Warning: GuildMgr: Could not load guildsfile, /home/itchynades/.showeq/tmp/guilds2.dat
Info: Loading Filters from '/usr/local/bin'
Info: Loading Zone Filter File: /usr/local/bin
Info: Loading Zone Filter File: /usr/local/bin
Info: Categories Reloaded
Info: No Map found for zone 'unknown'!
Info: Checked for all variants of 'unknown.map', 'unknown.txt', and 'unknown_1.txt'
Info: in directories '/home/itchynades/.showeq/maps' and '/usr/local/share/showeq/maps'!
Info: Loaded 7026 message strings from '/usr/local/share/showeq/eqstr_us.txt' maxFormat=35153
Info: Attempting to load map: /home/itchynades/.showeq/maps/maps/abysmal_1.txt
Info: Loaded SOE map: '/home/itchynades/.showeq/maps/maps/abysmal_1.txt'
Info: Listening for IP client: 192.168.1.13
Debug: PCAP Filter Set: udp[0:2] > 1024 and udp[2:2] > 1024 and ether proto 0x0800 and host 192.168.1.13
Re: ShowEQ and Raspberry Pi
did you update the version of showeq?
how do you have thing connected?
should be inet pi laptop wireless connection to pi. either that or you will need to set the pi up as your primary gateway or have a switch that can forward packets to your pi.