1 mob list

Printable View

11-15-2003, 12:34 AM
aneqplayer

1 mob list

Hi using the 1.9b and 1.15.7 and i don't know if it is the offsets or something else, but I see 1 mob for spawn list.. it does change if i hit refresh to a different one but first time it has been a problem here is the offsets i am using. It happens when i run it locally as 127.0.0.1 or on another machine(server is running it pulls correct map and cons)
Any ideas?

[Memory Offsets]
GroupCountAddr=7454208
GroupAddr=7454536
SpawnHeaderAddr=7460984
ItemsAddr=7460988
CharAddr=7461040
CharInfo=7461048
TargetAddr=7461052
GuildsAddr=7479052
ZoneAddr=7838464

[SpawnInfo Offsets]
NameOffset=1
XOffset=72
YOffset=76
ZOffset=80
SpeedOffset=96
HeadingOffset=100
LastnameOffset=304
LevelOffset=372
HideOffset=376
ClassOffset=378
RaceOffset=392
TypeOffset=364
NextOffset=284
SpawnIDOffset=384

[GroundItem Offsets]
NameOffset=44
XOffset=36
YOffset=40
ZOffset=32
SpawnIDOffset=384
NextOffset=4
11-15-2003, 09:43 AM
MQSEQ2

Turn on logging and post the results.
11-15-2003, 05:01 PM
aneqplayer

ok

This thread seems to have the same problem
http://seq.sourceforge.net/forums/sh...g&pagenumber=2

Log results:
11/15/2003 16:49:07:42 - Error with DrawLine(): Overflow error.
11/15/2003 16:49:07:43 - Error with DrawLine(): Overflow error.
11/15/2003 16:49:07:43 - Error with DrawLine(): Overflow error.
11/15/2003 16:49:07:43 - Error with DrawLine(): Overflow error.
11/15/2003 16:49:11:46 - Error with FillEllipse(): Overflow error.
11/15/2003 16:49:11:46 - Error with DrawLine(): Overflow error.
11/15/2003 16:49:11:46 - Error with DrawLine(): Overflow error.
11/15/2003 16:49:11:48 - Error with DrawEllipse(): Overflow error.
11/15/2003 16:49:11:51 - Error with FillRectangle(): Overflow error.
11/15/2003 16:49:11:51 - Error with DrawRectangle(): Overflow error.
11/15/2003 16:49:26:68 - Error with FillRectangle(): Overflow error.
11/15/2003 16:49:26:68 - Error with DrawRectangle(): Overflow error.
11/15/2003 16:49:26:93 - Error with FillRectangle(): Overflow error.
11/15/2003 16:49:26:95 - Error with DrawRectangle(): Overflow error.
11/15/2003 16:49:27:17 - Error with FillRectangle(): Overflow error.
11/15/2003 16:49:27:18 - Error with DrawRectangle(): Overflow error.
11/15/2003 16:49:27:42 - Error with FillRectangle(): Overflow error.
11/15/2003 16:49:27:43 - Error with DrawRectangle(): Overflow error.

"An error that occurs when the computer attempts to handle a number that is too large for it. Every computer has a well-defined range of values that it can represent. If during execution of a program it arrives at a number outside this range, it will experience an overflow error. Overflow errors are sometimes referred to as overflow conditions. "

Now, what router was the other user using? Don't know, wasn't posted, mine is a cheapo Network Everywhere. I have local software firewalls hooked up on both, same class C address 192.168.1.100+, under the software firewall(zonealarm) I put the whole network with SM as 255.255.255.0 so any hosts of the 192.168.1.0 would have all ports open and no firewall blocking.
I even tried it when the firewall is turned off.

My problem comes both from local at 127.0.0.1 for loopback or another host. I don't know if it is the executable coming acrossed too large of input to process or if there is MTU size problems between server/client. Any ideas?
11-15-2003, 05:59 PM
MQSEQ2

Have you tried to run both Client and Server on the EQ machine to see if it works?

It maybe the ZoneAlarm FW, check your logs to see if anything is being blocked on port 5555 (TCP). You need to allow Inbound and Outbound on that port. The FW logs should show something if the FW is causing the problem.

Does it show the correct zone map?
11-15-2003, 06:03 PM
aneqplayer

Did on same machine with loopback address, with zone alarm off and computer rebooted without zone alarm starting up so clear processes. Also added the Wan side IP address of router for trusted and all hehe dunno =\.

yes zone map is correct.

There is a lot of links of different releases, perhaps if I tried a verified combo of server and client it may clear things up?
11-15-2003, 09:29 PM
MQSEQ2

Use Server 1.9b with the following Offsets:

[Memory Offsets]
GroupCountAddr=7454208
GroupAddr=7454536
SpawnHeaderAddr=7460984
ItemsAddr=7460988
CharAddr=7461040
CharInfo=7461048
TargetAddr=7461052
GuildsAddr=7479052
ZoneAddr=7838464

Use Client 1.15.4 if 1.15.7 is still having problems.

The client must be configured to use the IP address of the Server. Don't use the routers IP unless the Server computer is the router itself. The Port needs to be configured to 5555 in the Client software.

If none of these work for you, then try downloading the Installation package from Xeer and try that one.
11-16-2003, 01:26 AM
aneqplayer

still not working.. i will try reinstall of .net. Also i noticed that i had a previous server folder of 48ish kb while the new one is near 96.. both had the name 1.9b. I wonder if there is something included in a re release that would make a difference? I got the 1.9 here before as well.
11-16-2003, 01:33 AM
MQSEQ2

Get the latest 1.9b, there was an update but the version wasn't changed. Look in the 1.15.7 thread and you can get the 1.9b from Jag's site.
11-16-2003, 10:17 AM
slartibartfast

You have the wrong ini settings use these:

[Memory Offsets]
GroupCountAddr=7454208
GroupAddr=7454536
SpawnHeaderAddr=7460984
ItemsAddr=7460988
CharAddr=7461040
CharInfo=7461048
TargetAddr=7461052
GuildsAddr=7479052
ZoneAddr=7838464

[SpawnInfo Offsets]
NameOffset=1
LastnameOffset=65
XOffset=104
YOffset=108
ZOffset=112
SpeedOffset=128
HeadingOffset=132
LinkdeadOffset=229
LFGOffset=232
EquipmentHeadOffset=272
EquipmentChestOffset=276
EquipmentArmsOffset=280
EquipmentWristsOffset=284
EquipmentHandsOffset=288
EquipmentLegsOffset=292
EquipmentFeetOffset=296
EquipmentPrimaryOffset=300
EquipmentSecondaryOffset=304
NextOffset=316
PrevOffset=328
TypeOffset=364
GenderOffset=374
LevelOffset=372
HideOffset=376
ClassOffset=378
SpawnIDOffset=384
RaceOffset=392
AFKOffset=404
BodyTypeOffset=408
HPCurrentOffset=412
DeityOffset=424
HPMaxOffset=428
GuildIDOffset=432
SpawnInfoEndOffset=436

[GroundItem Offsets]
PrevOffset=0
NextOffset=4
SpawnIDOffset=12
ZOffset=32
XOffset=36
YOffset=40
NameOffset=44
GroundItemEndOffset=68
11-16-2003, 01:24 PM
aneqplayer

kk

YES that was it the offsets besides the memory ones were the cause thanks a lot for all the help =p didn't know that the other offsets ever did change.
So from that I guess the overflow errors are indeed client to server communication problems and not related to network or buggy clients(using the .7 and new1.9b)

Thanks for the helps =p felt blind for a while =)
11-16-2003, 04:16 PM
jag111

The overflow errors are specific to those drawing functions and don't have anything to do with client/server communication. I actually fixed a couple a while back. What's probably happening (which is what was happening before) is that the methods that are being passed as arguments to those drawing functions aren't returning valid numbers like they're supposed to because data that those methods were counting on hasn't been initialized.

However, those drawing errors shouldn't even really concern you unless the map isn't showing something you think it should be showing.

Adding some more detailed logging code to those areas would probably help figure out what's causing the errors if we feel like tracking them down.

Sorry if this post sounds vague, but I don't have the code in front of me right now to be more specific.
11-16-2003, 05:08 PM
aneqplayer

well there are additional arguments in the ini for server that once added and changed previous(4 months ago perhaps was last download) is what did make it work. Tried both .4 and .7 clients and both working on both eq machine and other computer.
11-16-2003, 05:35 PM
MQSEQ2

I was totally confused in what you was trying to say in that last post. Can you try to say it another way?