For those of you who prefer RPMS like me:

[KennySP]

I've recently created a src.rpm of qt-2.3.2 that compiles with GCC3.

You can get the src.rpm at http://aleph.atecgroup.com/~chrisf/R....3.2-1.src.rpm

You can download that and then run:
rpm --rebuild qt2-2.3.2-1.src.rpm

Binary versions of those RPM's, compiled on RedHat 7.2 are also available from http://aleph.atecgroup.com/~chrisf/RPMS/index.html

My recommendation is to download the src.rpm and compile it on your system, I've put the binary versions there for those who would honestly take 4+ hours to compile it.

KennySP

[casey]

in the general discussion forum, zaphod has already posted rpms for qt 2.3.2, and i have posted debian packages.

[joeseq1999]

KennySP:

Thank you for the great help. I am new at all this and I am struggling. I can get v4 to run but it does not decode. I think I have fouled up the required updates to RH7.2.

If you are so disposed, would you mind posting the actual rpm command needed to use your rpm? I am not at all clear what command options are needed.

Your kind assistance is appreciated by many.

[casey]

type this

"man rpm"

read it

[joeseq1999]

Casey,

Please see my response under your other post.

[KennySP]

To use the source RPM, you will issue the following command while in the directory you downloaded the src.rpm to:

If you havn't touched anything (including have not downloaded the src.rpm) you will issue the command:

rpm --rebuild http://aleph.atecgroup.com/~chrisf/R....3.2-1.src.rpm

If you have already downloaded the RPM you will change into the directory you downloaded the RPM to and issue the command:

rpm --rebuild qt2-2.3.2-1.src.rpm

That will go through the entire compilation and then you will just need to install the rpm's it creates (Located in /usr/src/redhat/RPMS/i386)

KennySP