Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: CVS commit and tarball of ShowEQ 5.0.0.14

  1. 09-18-2004, 03:35 PM #1
    Zaphod
    Zaphod is offline
    Registered User Zaphod's Avatar
    Join Date
    Dec 2001
    Posts
    648

    Cool CVS commit and tarball of ShowEQ 5.0.0.14

    ShowEQ 5.0.0.14

    It works with 09/16/04 EQ Live (OoW).

    NOTE: ShowEQ now requires autoconf 2.54 or higher.

    NOTE: Don't forget to do a 'make -f Makefile.dist', 'configure', 'make', and last but definitely not least 'make install'.

    This release has been tested to compile and run on stock Fedora Core 2, and Gentoo 2004.2


    ShowEQ 5.0.0.14 should be available on the CVS pserver and the ViewCVS server in the pre_5_0_beta branch within the next few hours. To retrieve the latest beta from CVS use the following command:
    Code:
    $ export CVSROOT=:pserver:[email protected]:/cvsroot/seq
$ cvs login
$ cvs co -r pre_5_0_beta showeq
    Because so many of you like them... I've created a tarball for this release. The ShowEQ 5.0.0.14 tarball contains all of the latest changes and may be found here in the ShowEQ Files section or if that gives you troubles from my website.

    Enjoy,
    Zaphod (dohpaZ)
    Last edited by Zaphod; 09-18-2004 at 04:01 PM.
    Chief Software Engineer of the Apocalypse.
    http://showeq.doomed.to/
    SourceForge.net user: dohpaz.

    Personal thank you donations are now accepted.
    Reply With Quote Reply With Quote
  2. 09-18-2004, 03:40 PM #2
    purple
    purple is offline
    Developer
    Join Date
    Jul 2004
    Posts
    920

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    $ export CVSROOT=server:[email protected] :/cvsroot/seq is incorrect. It should be CVSROOT=server:[email protected]:/cvsroot/seq.

    Thanks, Zaphod!
    Reply With Quote Reply With Quote
  3. 09-18-2004, 03:41 PM #3
    Hobo
    Hobo is offline
    Registered User
    Join Date
    Dec 2001
    Posts
    154

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Thanks Zaph! One quick question...How do I check to make sure I have autoconf 2.54 or higher?





    Hobo
    Reply With Quote Reply With Quote
  4. 09-18-2004, 03:41 PM #4
    purple
    purple is offline
    Developer
    Join Date
    Jul 2004
    Posts
    920

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    autoconf --version
    Reply With Quote Reply With Quote
  5. 09-18-2004, 03:43 PM #5
    Hobo
    Hobo is offline
    Registered User
    Join Date
    Dec 2001
    Posts
    154

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Thanks )
    Reply With Quote Reply With Quote
  6. 09-18-2004, 03:54 PM #6
    Hobo
    Hobo is offline
    Registered User
    Join Date
    Dec 2001
    Posts
    154

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Hmmm...logging into CVS abd when I get the normal "CVS password:" prompt I hit enter and get:

    "cvs [loging aborted] end of file from server (consult above messages if any)"



    Any idea what is wrong? I did use the newer line:

    export CVSROOT=server:[email protected]:/cvsroot/seq


    Is Zaph's now the correct line? I.E. cvs.seq.sourceforge.net?
    Reply With Quote Reply With Quote
  7. 09-18-2004, 03:55 PM #7
    Zaphod
    Zaphod is offline
    Registered User Zaphod's Avatar
    Join Date
    Dec 2001
    Posts
    648

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Quote Originally Posted by purple
    $ export CVSROOT=:pserver:[email protected] :/cvsroot/seq is incorrect. It should be CVSROOT=:pserver:[email protected]:/cvsroot/seq.

    Thanks, Zaphod!

    Thanks for the catch purple... and remember to turn off the smilies of doom...

    And as far as checking your autoconf version, it'll automatically bitch if it's too low...

    Enjoy,
    Zaphod (dohpaZ)
    Chief Software Engineer of the Apocalypse.
    http://showeq.doomed.to/
    SourceForge.net user: dohpaz.

    Personal thank you donations are now accepted.
    Reply With Quote Reply With Quote
  8. 09-18-2004, 03:57 PM #8
    Zaphod
    Zaphod is offline
    Registered User Zaphod's Avatar
    Join Date
    Dec 2001
    Posts
    648

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Quote Originally Posted by Hobo
    Hmmm...logging into CVS abd when I get the normal "CVS password:" prompt I hit enter and get:

    "cvs [loging aborted] end of file from server (consult above messages if any)"



    Any idea what is wrong? I did use the newer line:

    export CVSROOT=server:[email protected]:/cvsroot/seq


    Is Zaph's now the correct line? I.E. cvs.seq.sourceforge.net?
    No, mine was a typo from an old template file I had... As for the message, that's caused by SF.net CVS being it's usual bitchy self...

    Also, it may take some time to appear in anon cvs... So, to get it quicker you can use one of the tarballs...

    Enjoy,
    Zaphod (dohpaZ)
    Chief Software Engineer of the Apocalypse.
    http://showeq.doomed.to/
    SourceForge.net user: dohpaz.

    Personal thank you donations are now accepted.
    Reply With Quote Reply With Quote
  9. 09-18-2004, 06:29 PM #9
    CSHELL
    CSHELL is offline
    Registered User
    Join Date
    Sep 2004
    Posts
    4

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Thanks Zaphod!! Runs Great!!
    Reply With Quote Reply With Quote
  10. 09-18-2004, 08:11 PM #10
    BlueAdept
    BlueAdept is offline
    Did you SEQ today? BlueAdept's Avatar
    Join Date
    Dec 2001
    Posts
    2,008

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Hey Zaphod. Good to see you back at it again.
    Filters for ShowEQ can now be found here. filters-5xx-06-20-05.tar.gz

    ShowEQ file section is here. https://sourceforge.net/project/show...roup_id=10131#

    Famous Quotes:

    Ratt: WTF you talkin' about BA? (Ok.. that sounds like a bad combo of Diffrent Strokes and A-Team)

    Razzle: I showeq my wife
    Reply With Quote Reply With Quote
  11. 09-18-2004, 08:26 PM #11
    Loco
    Loco is offline
    Registered User
    Join Date
    Jul 2002
    Posts
    20

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    I just want to say its nice to see you posting Zaphod. I hope all is well with you and thanks for the update.
    Reply With Quote Reply With Quote
  12. 09-19-2004, 03:26 AM #12
    SEQ Newbs
    SEQ Newbs is offline
    Registered User
    Join Date
    Sep 2004
    Posts
    1

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Thank you developers for all your hard work. I couldnt get the newest version from CVS, but the .tar file worked perfectly. Now me, and my roomates, can enjoy our EQ groups that much more.

    Thanks to all.
    -The Newbs
    Reply With Quote Reply With Quote
  13. 09-19-2004, 09:44 AM #13
    LordCrush
    LordCrush is offline
    Registered User
    Join Date
    Dec 2001
    Posts
    752

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Hey Zaphod How are you nice to here from You
    -- Lord Crush

    Greater Faydark has to be cleaned from all Elves !

    This is a HOTKEY !!!
    Reply With Quote Reply With Quote
  14. 09-20-2004, 09:22 AM #14
    KaL
    KaL is offline
    Registered User
    Join Date
    Apr 2002
    Posts
    151

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Rock on! Good to see SEQ still going strong after so long.
    Reply With Quote Reply With Quote
  15. 09-20-2004, 11:50 AM #15
    tanner
    tanner is offline
    Registered User
    Join Date
    Jul 2004
    Posts
    329
    Send a message via ICQ to tanner Send a message via AIM to tanner Send a message via Yahoo to tanner

    Re: CVS commit and tarball of ShowEQ 5.0.0.14

    Just put up showeq_5.0.0.14-1_i386.deb

    deb ftp://ftp.real-time.com/linux/real-time unstable custom
    deb-src ftp://ftp.real-time.com/linux/real-time unstable custom

    -----BEGIN PGP SIGNED MESSAGE-----
    Hash: SHA1

    Format: 1.7
    Date: Mon, 20 Sep 2004 12:30:39 -0500
    Source: showeq
    Binary: showeq
    Architecture: source i386
    Version: 5.0.0.14-1
    Distribution: experimental
    Urgency: low
    Maintainer: Bob Tanner
    Changed-By: Robert J. Tanner
    Description:
    showeq - Realtime packet analyzer for Everquest
    Changes:
    showeq (5.0.0.14-1) experimental; urgency=low
    .
    * New upstream release
    * Official CVS patch from dophaZ: Applied pac1085's level70 and race patches.
    * Official CVS patch from dophaZ: Applied ksmith's structure patch.
    * Changed autoconf min version requirement to 2.54. (dophaZ)
    * Tweaked raw packet logging to log both pre and post decompress/decrypted raw
    packets to aide in debugging packet unrolling problems. (dophaZ)
    * Made ShowEQ ignore new login server ports (dophaZ)
    Files:
    1d5f46f4d77f658f57a2106d7ea509e2 711 net optional showeq_5.0.0.14-1.dsc
    ffb4a544d652a860b19f021295e5b889 2693042 net optional showeq_5.0.0.14.orig.tar.gz
    b0802460505fafa441759f23b3555613 7865 net optional showeq_5.0.0.14-1.diff.gz
    efaaf7900309249d0a65fefc6c6f6006 12799872 net optional showeq_5.0.0.14-1_i386.deb

    -----BEGIN PGP SIGNATURE-----
    Version: GnuPG v1.2.5 (GNU/Linux)

    iD8DBQFBTxbVfPGnCSzBsogRAunQAJ47B/qSZipaX8xQiV19RY+D59HYjwCgsxda
    mXtxJYpseeueR2FDOqSogIk=
    =2+Wn
    -----END PGP SIGNATURE-----
    Changelog attached.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

You may post new threads
You may post replies
You may post attachments
You may edit your posts 		HTML code is On
vB code is On
Smilies are On
[IMG] code is On