Just reinstalled, still no NPC's

[jgorrell]

HEre is my SEQ output:


GuildMgr: guildsfile loaded
Categories Reloaded
Error opening map file '/usr/local/share/showeq/unknown.map'!
Opcode Logging Mask: 0 0 0
Client Detected: 192.168.1.100
INVALID PACKET: Bad CRC32 [192.168.1.100:1614 -> 192.168.1.101:10666] seq 5896 l
en 65524 crc32 (ffffffff != 49aeeebe)
GuildMgr: new guildsfile written
GuildMgr: guildsfile loaded
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
EQPacket::dispatchZoneData():CharProfileCode:Not Decoded
Loaded map: '/usr/local/share/showeq/Shadowhaven.map'
No Zone Specific filter file '/usr/local/share/showeq/filters_shadowhaven.conf'.
Loading default '/usr/local/share/showeq/filters.conf'.
PrcoessPacket() Inflate Error: inflateRes=-3 msg=invalid window size
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
TIME: 09:57 06/24/3185
EQ EPOCH OCCURRED AT 772345522 SECONDS POST UNIX EPOCH
CPlayerItems: count=24 size=8692 packetsize=362 expsize=362
Can't find spawn point file /usr/local/share/showeq/shadowhaven.sp
No Zone Specific filter file '/usr/local/share/showeq/filters_shadowhaven.conf'.
Loading default '/usr/local/share/showeq/filters.conf'.
Your player's id is 2139
WARNING: Decoded NewSpawnCode (6b42) (dataLen:159 != sizeof(newSpawnStruct):226)
!
Diety: NPC
WARNING: Decoded NewSpawnCode (6b42) (dataLen:154 != sizeof(newSpawnStruct):226)
!
Loaded map: '/usr/local/share/showeq/Paludal.map'
Can't find spawn point file /usr/local/share/showeq/paludal.sp
Loading, Please Wait... (Zone: 'paludal')
No Zone Specific filter file '/usr/local/share/showeq/filters_paludal.conf'.
Loading default '/usr/local/share/showeq/filters.conf'.
WARNING: Decoded NewSpawnCode (6b42) (dataLen:164 != sizeof(newSpawnStruct):226)
!
EQPacket: SEQClosing detected, awaiting next zone session, pcap filter: EQ Clie
nt 192.168.1.100
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
EQPacket::dispatchZoneData():CharProfileCode:Not Decoded
Loaded map: '/usr/local/share/showeq/Paludal.map'
No Zone Specific filter file '/usr/local/share/showeq/filters_paludal.conf'.
Loading default '/usr/local/share/showeq/filters.conf'.
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
TIME: 10:42 06/24/3185
EQ EPOCH OCCURRED AT 772345525 SECONDS POST UNIX EPOCH
CPlayerItems: count=24 size=8692 packetsize=362 expsize=362
WARNING: Decoded NewSpawnCode (6b42) (dataLen:141 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:139 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:142 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:131 != sizeof(newSpawnStruct):226)
!
No Zone Specific filter file '/usr/local/share/showeq/filters_paludal.conf'.
Loading default '/usr/local/share/showeq/filters.conf'.
WARNING: Decoded NewSpawnCode (6b42) (dataLen:149 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:147 != sizeof(newSpawnStruct):226)
!
GROUPSIZE: 0
MY Level: 1
GroupTot: 1
BONUS :100
Your player's id is 2174
WARNING: Decoded NewSpawnCode (6b42) (dataLen:150 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:145 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:157 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:137 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:147 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:141 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:146 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:153 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:156 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:138 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:151 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:137 != sizeof(newSpawnStruct):226)
!
Name:@
WARNING: Decoded NewSpawnCode (6b42) (dataLen:155 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:149 != sizeof(newSpawnStruct):226)
!
Loaded map: '/usr/local/share/showeq/Shadowhaven.map'
Can't find spawn point file /usr/local/share/showeq/shadowhaven.sp
Loading, Please Wait... (Zone: 'shadowhaven')
No Zone Specific filter file '/usr/local/share/showeq/filters_shadowhaven.conf'.
Loading default '/usr/local/share/showeq/filters.conf'.
EQPacket: SEQClosing detected, awaiting next zone session, pcap filter: EQ Clie
nt 192.168.1.100
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
EQPacket::dispatchZoneData():CharProfileCode:Not Decoded
Loaded map: '/usr/local/share/showeq/Shadowhaven.map'
No Zone Specific filter file '/usr/local/share/showeq/filters_shadowhaven.conf'.
Loading default '/usr/local/share/showeq/filters.conf'.
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=unknown compression method
PrcoessPacket() Inflate Error: inflateRes=-3 msg=incorrect header check
TIME: 11:16 06/24/3185
EQ EPOCH OCCURRED AT 772345520 SECONDS POST UNIX EPOCH
CPlayerItems: count=24 size=8692 packetsize=362 expsize=362
No Zone Specific filter file '/usr/local/share/showeq/filters_shadowhaven.conf'.
Loading default '/usr/local/share/showeq/filters.conf'.
WARNING: Decoded NewSpawnCode (6b42) (dataLen:149 != sizeof(newSpawnStruct):226)
!
WARNING: Decoded NewSpawnCode (6b42) (dataLen:167 != sizeof(newSpawnStruct):226)
!
GROUPSIZE: 0
MY Level: 1
GroupTot: 1
BONUS :100
Your player's id is 2147
WARNING: Decoded NewSpawnCode (6b42) (dataLen:148 != sizeof(newSpawnStruct):226)
!


I just did a re-install and this is what i'm getting now. I can see forges and my stats will show up, but still no NPC's. If I select one, It is one of the unknown items in the list. Also - my maps just started doing what everyone else is talking about, where it is really small.

Anyways, thanks in advance. And I have searched and none of the fixes i found would work.

[Catt]

My first guess would be a libEQ.a issue.

Make sure you have only 1 on your system, and it's the latest version, then rebuild (clean).

use locate to check: locate libEQ.a

mine was:

/usr/local/lib/libEQ.a

Yes, technically you can have more IF they are not in include paths, do YOU know all the includes?

[jgorrell]

Okay, now I'm getting new output, but still no info on mobs. I see where I am, my stats, and where forges and the such are located. I verified my memory address and libEQ.a file. They are both correct.



Client Detected: 192.168.1.100
EQPacket::dispatchZoneData():CharProfileCode:Not Decoded
Loaded map: '/usr/local/share/showeq/Commons.map'
Loading Filter File: /usr/local/share/showeq/filters_commons.conf
TIME: 14:24 06/27/3185
EQ EPOCH OCCURRED AT 772345521 SECONDS POST UNIX EPOCH
CPlayerItems: count=150 size=54304 packetsize=362 expsize=362
Can't find spawn point file /usr/local/share/showeq/commons.sp
Loading Filter File: /usr/local/share/showeq/filters_commons.conf
Your player's id is 940
SPELL: You begin casting Improved Invisibility. Current Target is Alkure(940)
selfStartSpellCast - id=1406
selfFinishSpellCast - id=1406, by=6
L Line 11 in map '/usr/local/share/showeq/Ecommons.map' has fewer points than sp
ecified!
Loaded map: '/usr/local/share/showeq/Ecommons.map'
Can't find spawn point file /usr/local/share/showeq/ecommons.sp
Loading, Please Wait... (Zone: 'ecommons')
Loading Filter File: /usr/local/share/showeq/filters_ecommons.conf
EQPacket: SEQClosing detected, awaiting next zone session, pcap filter: EQ Clie
nt 192.168.1.100
EQPacket::dispatchZoneData():CharProfileCode:Not Decoded
L Line 11 in map '/usr/local/share/showeq/Ecommons.map' has fewer points than sp
ecified!
Loaded map: '/usr/local/share/showeq/Ecommons.map'
Loading Filter File: /usr/local/share/showeq/filters_ecommons.conf
TIME: 14:46 06/27/3185
EQ EPOCH OCCURRED AT 772345520 SECONDS POST UNIX EPOCH
CPlayerItems: count=150 size=54304 packetsize=362 expsize=362
Loading Filter File: /usr/local/share/showeq/filters_ecommons.conf
GROUPSIZE: 0
MY Level: 59
GroupTot: 59
BONUS :100
Your player's id is 1821

[Catt]

That's progress, now you need to figure out how you are going to get the current (changes each time you zone) key and how you are going to get it to your SEQ. There almost are as many ways as there are people doing it, read the threads in this forum for more info.

[jgorrell]

I've tried the two most popular ones in this forum, which I'm sure you can figure out which those are

They both compiled fine, and seem to be running fine. KeyRing, which tells you the key's being sent, says it is sending the keys to the correct IP, but I still do not see mobs and such on my screen. I dont see anything new on my ShowEQ box in the console, but I am unsure if I am supposed to see anything different there or not.

I have tried zoning back and forth a couple times with nothing new. I have also tried changing the port around that I am sending the keys on.

I have to go to work in a few hours, but if I get a chance ill post complete output in this thread from both computers.

Thanks for the help so far

[NHRAfan]

Did you tell SEQ what port keyring is sending the key on?

[jgorrell]

I use the auto detection on SEQ. Will that no longer work when using sniffers? If that's what my problem is, I want a hug from you.

I'd try it right now but i'm gonna' be late for work! Ill try first thing tonight.

[jgorrell]

Okay, just tested it real quick. All I did was go under the Decoder Menu and specified the key port. I didn't have enough time to really look around, but I zoned a couple times and it's still the same. I probably just left something out...

[Dedpoet]

What port are you using? It's not 10000, is it? If it is, change it to some other 5 digit number, and click File -> Save Preferences. Make sure your sniffer is using the same port.

[jgorrell]

Got it working These ideas led me in the correct direction - thanks

[AlexJ213]

What did you change? I am having the exact same problem after a fresh install and can't figure it out.

[datadog]

PLEASE!

Dont put us all through this and then not tell us how you fixed it.!

Others will benefit from your experience !

[jgorrell]

Sorry All I did was run SEQ first, then run the key sniffer, then run EQ and it all works fine, I dont even have to zone using it in that order.

The problem I was having before was that the key sniffer was loaded in the memory from running it once and it never closed when I closed EQ. Therefore, I had to reboot to clear it out. For some reason it's still not closing the key sniffer when I close EQ so I have to reboot each time I want to run EQ again.